TUBES FOR PLUMBING

EN 10255 ASTM A53M

With proven reliability, Ferpinta's plumbing tubes comply with the EN 10255 standard and are suitable for the most diverse applications: in general, domestic or industrial fluid and non-flammable gas (water, air or non-flammable gas at low pressure, fire-fighting networks) piping installations.

They are also applicable in structural contexts other than conduction (e.g. greenhouses).

All products are subject to hydro-static testing, done in accordance with standard pressures, and non-destructive testing (induced currents).

The rigorous control process guarantees meticulous sizing and complete traceability.

These tubes, according to their use, may be available with smooth, threaded, or grooved ends, rough rolled or hot-dip galvanized.

Series M	Outside Diameter mm	Thickness mm
Min(mm)	17,2	2,3
Max. (mm)	165,1	5

Series H	Outside Diameter mm	Thickness mm
Min(mm)	17,2	2,9
Max. (mm)	165,1	5,4

Type L1	Outside Diameter mm	Thickness mm
Min(mm)	17,2	2
Max. (mm)	114,3	4

Type L2	Ouside Diameter mm	Thickness mm
Min(mm)	17,2	1,8
Max. (mm)	114,3	3,6

Series M
Dimensions mm
Min 17,2
Max 165,1
Thickness mm
Min 2,3
Max 5

Series H
Dimensions mm
Min 17,2
Max 165,1
Thickness mm
Min 2,9
Max 5,4

Type L1
Dimensions mm
Min 17,2
Max 114,3
Thickness mm
Min 2
Max 4

Type L2
Dimensions mm
Min 17,2
Max 114,3
Thickness mm
Min 1,8
Max 3,6

Maximum/minimum values for reference.

For further information, consult the technical data sheet

Download Datasheet

Steel grades

S195T

SUPPLY CONDITIONS

PACKAGING

The material is available in geometric ties, strapped with steel bands, in hexagonal, square, and/or rectangular shapes. To facilitate handling (loading/unloading), all the ties are supplied with polyester straps suitable for the weight of the tie.

LABELING

Each tie is supplied with a label attached by a metal clip, ensuring the identification of the product and consequently its traceability.

SURFACE PROTECTION

During manufacture, all tubes are coated with a protective oil, which has a high hydrophobing power, to protect the surface against corrosion. Unless otherwise stated by the customer at the time of the order/inquiry.

CERTIFICATE

On shipment, all orders are accompanied by the respective inspection certificate according to EN 10204, in accordance with the product’s applicable standard.

SUPPLY OPTIONS

COATING

Hot-dip galvanized tubes can be supplied, according to EN 10240 A.1/A.2 or ISO 1461, providing greater protection against corrosion.

Painted tubes can be supplied.

SPECIAL TOLERANCES

Special tolerances must be requested when inquiring/ordering.

WELDING

Possibility of removing the internal welding seam.

SUITABILITY FOR GALVANIZATION

Possibility of supplying tubes with chemical properties that guarantee their suitability for hot-dip galvanization.

CARBON EQUIVALENT VALUE (CEV)

Possibility to specify the CEV value at the time of inquiry/order.

LENGTH

Capacity to supply tubes with specific lengths, requested at the time of inquiry/order.

SPECIFIC (OR SPECIAL) DEFORMATION OPERATIONS

Tubes can be supplied, according to the most demanding deformation capabilities.

PACKAGING

The ties can be configured, according to the client's indications, at the time of the inquiry/order. Possibility of using packaging with anticorrosion protection (VCI).

LABORATORY TESTS

Possibility of requesting specific laboratory tests, not foreseen in the applicable standard (anisotropy, salt fog, metallography, thickness elongation, among others)